Reinstall the fender liner access panel and then, using a phillips screwdriver, lock it in place by tightening the 2 plastic screws.ġ0. Reinstall the plug back into the DRL socket.ĩ. Carefully reinstall the black DRL socket back into the light housing and then rotate it clockwise until it locks in place.Ĩ. Install your new 1157 LED bulb into the DRL socket by pushing it in and rotating it until it locks in place.ħ. Remove the factory P21 incandescent bulb from the DRL socket by gently pushing down on it and then rotating it.Ħ. Firmly hold the black DRL socket and rotate it counter-clockwise until it's unlocked and then remove it from the light housing.ĥ. (NOTE: I only unplugged the indicator light to help make it easier to photograph. Gently pull the locking tab on the black socket plug and pull down to remove it as shown. The white socket on the left is for your indicator lights and the black one on the right is for your DRL. Looking into the access port, you will see there are 2 different wires plugged into 2 different bulb sockets. With the screws loosed, you should be able to simply pry off the fender liner access panel.ģ. Then, use a phillips screwdriver to loosen the 2 plastic screws securing the fender liner access panel in place.Ģ. Park your Renegade and turn your steering wheel to the left and until it is at a full lock. (2) 1157 White LED Bulbs - CANBUS NO Error Freeġ.There are a lot of different manufacturers of LED bulbs and the set I ended up buying was made by HAMIST and I found them on Amazon. Not all LED bulbs are and it is important that the ones you get are. Also, when shopping for a set of 1157 LED bulbs, you will need to make sure that it is "CANBUS NO Error Free". What you will need to know is that your factory DRL incandescent bulbs are a standard P21 which are commonly used for car tail lights/brake lights and turn signal lights and the LED equivalent will be a 1157. Fortunately, changing out your factory DRL bulbs to a set of LED bulbs is not only cheap to do, it's also extremely easy to do. For those of you who've converted your Jeep Renegade halogen headlights to a set of LED bulb and are wanting to change out your sickly yellow-brown day time running lights or "DRL" to something a bit more white in color, this write-up will help you to do just that.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |